iPhone charging port repair hamilton

One of most common iPhone repair is iPhone charging port repair . Compairing iPhone charging port problems with other leading brand like samsung iPhone has achieved charging port reliability much lasting and ease of use than any other brand of phones. They way iPhone charging port is designe it is less likely it will break but you might find the charger pin is not going all the way in and doesn’t not come in contact with the charging pins inside and won’t charge. if you are having this problem most probably there is dust accomilated inside. To remove any dust stuck inside we use a dental tool which is sharp half rounded easy to clean iPhone charging port. see in the below picture.

how to clean iPhone charging port

To have precise clean charging port repair we use a dental tool as in the above picture. But sometimes just the cleaning is not enough. Iphone charging connecters inside the port which come in contact with charger port might be rusted or has dust accumulated. You can spot a electronic cleaning foam bottle in the picture which we find is best to clean any electronic component. After removing dust put a little bit of foam on the iPhone charging port and leave it for few minutes then clean it with ESD safe brush.

how to remove iPhone charging port

if iPhone charging port does not work after cleaning then it is time to replace. The difficulty level on iPhone charging port repair or replacement is 5 out of 10. Tools you need for diy iPhone charging port repair are, P2 Pentalobe Screwdriver, phillips #000 screwdriver, metal Uspudger, tweezer, heat gun and new charging port. If you don’t have iPhone  holder work tool as in the above picture. we highly recommend to remove lcd aswell before you start removing iphone charging port cable.

You will find around 10 screws which are holding the full iPhone charging port cable with the rest of the iPhone housing. Iphone charging port has fitted mic and headphone jack and also loud speaker. So beside the iPhone charging port if your mic, headphone jack are not working you have to replace iPhone charging port cable. Even though iphone loud speaker is not part of iPhone charging port cable but it sits on the iPhone charging port cable and connected to logic board via charging port cable. In the below picture see the loud speaker.

once all the screws are removed and other small components are taken out rest of the iPhone charging port is glued with iPhone housing. We recommend instead of pulling out give it some heat with heathen so that it can be peeled off smoothly.

Screws which taken out are different sizes if you mixed them you will find it hard which screw to go where. When you take them out keep them with same pattern as they came out. Now insert new charging port screw back and you are one.

where to get iPhone charging port repair in hamilton

At Applefix hamilton we keep all iPhone original charging port in stock and iPhone charging port replacement is one hour repair. Bring it to applefix at 85/a victoria street hamilton or give us a call at 078394188 for a free quote.