iPhone housing replacement
iPhone housing replacement hamilton
We can make your iPhone look new by iPhone housing replacement Even if you look after your iPhone well there are chances you can get scratches, dent on iPhone metal housing. We at applefix hamilton can give your iPhone brand new look. Below is an example of iPhone housing replacement and you can see a badly damaged iPhone has brand new look.
Can you do it yourself?
iPhone housing replacement is difficulty level 6 out of 10. We will advise if you want to DIY. you should buy iPhone housing with all the cables, like, power and volume cables and charging port cables fitted. As is you are buying just housing it is quite difficult to remove all the cables from old housing and then to fit on new one. you might break these cables. Buying iPhone housing with all the cables fitted will make your work easy and quick.
Guide to replace housing.
First you should have all the tools for iPhone housing replacement. Remove the two 3.6 mm Pentalobe screws next to the Lightning connector. With a small suction cup gently pull lcd from the frame. once lcd is removed you need phillips screw driver to remove two screws from battery connector. Once battery connector removed now move to lcd connector metal plate which is screwed with 3 screws on to the housing. This screw tends to not be attracted to a magnetised screwdriver. Take care not to lose it when removing, and make sure it gets back into the right place—a magnetised screw may interfere with the compass. Now gently remove lcd connectors with a plastic plunger. next you will find few screws on logic board. Unscrew logic board off the housing. Once logic board came out. now do the reverse and put all the parts back the way they came out and you are done.
if you break any part and need help you can bring it to applefix hamilton at 85/a Victoria street hamilton or call 07-8394188