iPhone glass coming off frame

iPhone glass coming off frame

iPhone glass coming off frame

iPhone glass coming off frame repair

Lots of people having this problem on their iPhone glass coming off frame and mostly it is is on iPhone 6. But you can have this problem on any iPhone 5/5/5c/5s/6 or 6 plus. We have noticed iPhone glass coming off frame on after market poor quality lcd screen which was replaced after original lcd was broke. If you take your iPhone to a unprofessional repair centre most probably this is what will happen and your iPhone lcd or glass will start coming off from frame. If you experienced same on your iPhone then bring it to applefix at 85/a victoria street hamilton or call 078394188. we replace the iPhone frame with in one hour. Below is picture of iPhone glass coming off frame and fixed in our workshop.

iPhone glass coming off frame

iPhone glass coming off frame

iPhone glass coming off frame

iPhone glass coming off frame

In the below picture you can see the iPhone glass coming off frame fixed.

iPhone glass coming off frame

iPhone glass coming off frame

Why lcd comes off frame? iPhone glass coming off frame

EM (original Apple) LCDs use a cold press for adhering the frames to the glass. The glue they use they refer to CPA or CPG for Cold Press Glue/Adhesive, however that’s not a brand or type as it’s just a basic description. They apparently use a custom adhesive specifically made for them. But after market low quality lcd screen use poor quality adhesive which start losing strength and gradually lcd start coming off. The new frame which we put on is original and we use cold press technology to glue the frame on glass again which has same strength as original.

Reason behind iPhone frame separation? iPhone glass coming off frame

  1. Glue

Generally, iPhone 6 LCD assemblies and frames are held together by PUR glue, which has two types HMG (Hot Melt Glue) and CPG (Cold Press Glue). OEM factories use CPG to assemble the screen and frame, which requires 15 seconds cooling time, 2-3 hours protecting time (Protecting time: time to keep the mold to hold the glued parts). It needs higher cost, longer working time and better equipment to produce and handle. While the assembled flex or refurbished iPhone 6 screen replacements are glued with HMG which the cooling time is 10 seconds and the protecting time is only around 6 seconds. It costs less, doesn’t require a strict working environment, has a shorter working time and results in weaker stickiness.

2. Frame

For assembled flex and refurbished iPhone screen assemblies with frames, both the frame and the front glass are high copies, and the frame is custom-made according to the size of the original front glass. After the moods of these two parts have been made, third party factories will constantly use them which means once the frame separation problems had occurred, many of the parts have already been sold in the market previously and currently.

 


0

Your Cart